Magnetic fly screens are the silent saviours from an army of flies and mosquitoes in Auckland. It is a smart and snap-on solution to keep the indoor air flow maintained with an added pest-free and peaceful life.
Choosing to go DIY with magnetic window screen is not just about the customisation. It is about convenience and control in tailoring the specific screen with the right measurements and the choice of finish you want. Save time and money while enjoying the satisfaction of doing it yourself.
Are you wondering how to go DIY while installing premium magnetic fly screens in Auckland? Here’s your how-to guide.
Right Way to Install a DIY Magnetic Window Screen
Most DIY kits come with detailed instructions. Make sure you clean the window frames before starting to gear up for the DIY play. Also keep necessary tools such as measuring tape, adhesive tapes, the mesh screen, corner connectors, trimming scissors handy for further assistance. Now let’s break down the process.
Step 1: Measure the Frame
Use a measuring tape to get the exact height and width of your window frame. Keep a note of the detailed measurements carefully. Precision here ensures a tight and snug fit for the screen.
Step 2: Trim the Mesh
Lay out the mesh screen on a flat and clean surface. Trim the mesh using scissors while maintaining the previous measurements accurately leaving about an extra inch on each side for further adjustments and fitting. The slight overlap will make sure that no bugs and pests sneak in from the edges.
Step 3: Apply the Adhesive
Peel and stick the adhesive-backed magnetic strip around the window frame. Press firmly to ensure it sticks securely. Also make sure that the corners align neatly.
Step 4: Fix Attachments
Next, connect the corners to the magnetic strips if your kit includes them. These help the frame hold its shape and increase durability. As magnetic fly screens in Auckland are one of the best investments made by homeowners it is better to go for a double check to negate any further inconveniences.
Step 5: Fit the Mesh
Finally it is time to attach the trimmed mesh screens to the magnetic strips starting from the top and moving down the sides evenly. Press along the edges to make sure the mesh adheres to the magnets. Smooth out any wrinkles or bubbles for a cleaner finish.
And you are done! Your DIY magnetic window screen is now installed and ready to keep bugs out while letting fresh air in.
Pitfalls to Avoid while Installing DIY Magnetic Window Screen
One common mistake while doing a DIY magnetic window screen installation is not cleaning the surface. This weakens the adhesive backing leading to the strips falling off in no time. Also try to avoid uneven placement of the magnetic strips. This can lead to unwanted gaps and loose corners that would be beneficial not for you but for the flying intruders.
Installing DIY magnetic window screen might be a small weekend task but it is one of those that makes a noticeable difference. Occasionally, give the screens a gentle vacuum or wipe-down to maintain the valuable apparatus to serve you all year long. But if you are in doubt or in need of professional advice you can anytime go check out Ecoscreen online for the best professional help or service for your magnetic insect screens in Auckland.